Check Out How Window Repair Is Taking Over And How To Stop It

Window Repairs

Window repairs can help homeowners save money and ensure their comfort. In the event of serious damage, such as broken glass or a shattered frame, a replacement window may be necessary.

However, many other issues can be fixed to prolong the lifespan of your windows. Some common issues include:

Cracked or broken Panes

Whether it's an errant rock that was tossed by your lawnmowers or a tree branch that has been blown by high winds, cracked window glass is not only ugly, but it can also result in higher electric bills since the broken pieces let cold air to enter your home. It's relatively easy to repair windows that have broken panes.

Start by carefully removing glass with gloves and safety sunglasses. You may need to make use of a utility knife in order to loosen any remaining putty or glazing compound around the edges of the frame. Then, use a gentle paper towel or cloth to clean the glass's surface and the wood of the frame.

After the area is cleaned, apply a waterproof silicone caulking to the frame's perimeter. This will stop water from getting in through the crack, which could cause further damage to both the frame and the glass.

If you have double-paned glass, a bad crack could compromise the gas layer between the panes and make your windows less insulative. If the crack is severe enough to compromise the quality of the glass or in the case of an inner pane completely missing, it's the time to call a professional.

Cracks in the glass caused by thermal stress may occur when there is a significant temperature difference between your home and the outside. The glass is then able to expand and contract. If this happens to two portions of a window it's best to replace the window instead of trying to repair it.

Clear tape can be used to fill cracks in windows that are not yet ready for replacement. It also keeps out bugs and cold wind. You can cut a piece of nylon stocking or tarp that's large enough to cover the crack, and stick it to the wall using duct tape. This isn't a long-term solution however it can be useful in the event of a crisis and keeps insects and cold air from entering your home. If you notice cracks on your older windows, you should check with the local company to determine if replacing the whole window is a better option.

Rotten Wood

Wood rot is a common problem for windows. It can damage a home's appearance and pose a safety risk. It is, however, possible to repair rotted wood. First, you must determine the root of the wood rot. Look for leaks on the roof and other places where water can enter the wood.

You'll then have to take off the rotten parts of the window frame. This can be accomplished with a rasp, chisel or claw hammer. After removing the decayed wood, you'll have to replace it with new wood. Pre-treated wood is suggested for this project, as it is resistant to decay. If you are unable replace the wood that has been damaged then you can use wood hardener or filler to repair the damaged area. This kind of product can be found in a lot of hardware stores. Follow additional resources on the label of the product to ensure the most effective results.

After you have replaced the rotten areas of the windowsill, it's important to protect the repaired area. Apply a water-resistant sealant to the wood. A product like Sikkens is an excellent option for this job.

Make use of a two-part epoxy to protect the wood against further damage. It is easy to apply and gives an excellent finish. However, it is very important that you follow the application instructions on the label. After the epoxy filler dries, you can sand down the surface of the wooden. Start with a rough sandpaper, then move on to more smoother grades.





The final thing you want to do is make the rotted area even worse by exposing it to more water. It is a good idea, that's why you should cover the surface repaired with an oil-based primer which will shield it from moisture. Then, you can reapply the wood sealant, which is waterproof.

It won't open

There are a variety of reasons windows don't open. The house may have settled, or the wood frames may have warped in wet weather. There is also the possibility that someone secured them with a nail for security. However, with a little patience and the right tools, most windows that are locked can be opened.

One of the most common causes of windows that won't open is accumulated gunk or debris on its moving parts. Grime and dirt build up on the sliding tracks, hinges and locks over time, according to Acme Glass. Additionally, metal hardware can be rusty when it comes in contact with humidity or direct sunlight. Making sure these areas are lubricated with spray grease can help to prevent oxidation and keep your window operating well.

The pulleys used to raise or lower the window could be loosened, or break. These parts can lose tension and cause obstruction when they are situated higher than two floors above the surface.

If you are having trouble opening the window Try using a pry bar to gently push the window to open just a little at each time. Put a piece of wood on the frame to give your pry bar more leverage, and be careful not to scratch the window or wood. Try applying a hairdryer along the frame's edges for several minutes. This will warm the wood and make it easier to move.

A broken spring could be the cause of a window that won't raise or lower. Depending on the manufacturer of your windows, you will need to refer to the manual of your owner for additional instructions.

If you've tried cleaning the moving parts of your windows and lubricating them but they're still not opening It could be time to replace windows with energy-efficient, new windows from Homespire Windows and Doors. Don't let the windows in your home go from functional to useless. A window that isn’t properly shut can leave your home vulnerable for water damage and burglary. Contact us to learn more about our windows replacement services and products today!