15 Amazing Facts About Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism deteriorated? Perhaps Highly recommended Web-site on your uPVC windows or doors are not aligned properly or are difficult to use.

It's important that your double-glazed doors function smoothly, or else you will lose energy and increase the chance of burglary. Owen the Locksmith will be able to fix your door lock at an affordable price.

Snapped Key

It can be a hassle when a key snaps inside the lock. It also poses an issue for security, since the door may not be locked and make you vulnerable to burglars. Fortunately, there are some quick fixes you can try to resolve the issue and get your door functioning properly once more.

The first step is to remain calm. If you panic you could end up pushing the broken key further into the lock.

Spray WD-40, or another penetrating oil, into the lock. This will allow the broken piece be removed more easily. You can also use a screwdriver to break up any pieces that are stuck. If you're lucky enough to have a little bit of the key left sticking out, you can use a paperclip or some other thin metal object to grab it and then pull it out. Both methods are effective, but you need to be careful not to push the damaged key piece further into the keyway.

Some paperclips have grooved edges which can be used as hook extractors. Jigsaw blades also work well for this. If you don't happen to have any of these, you can bend a hook using needle-nosed pliers. Finally, you can use a pair tweezers to grab and pull out the last bit of the broken keys.

If you cannot remove the broken piece of key then you can use a lock deicer. It's usually available at all hardware stores, and it is used to freeze any moisture or ice that may be inside the lock.

If none of these solutions work, it could be time to consult a locksmith. Fitlocks experts can fix issues such as broken handles and broken keys with uPVC locks and door mechanisms. They can also reconfigure your double glazing door mechanisms to allow them to operate more easily. You can schedule repairs to your double-glazing online or contact us to discuss your requirements.

Broken Cylinder

A broken cylinder can be a major security risk. A locksmith professional can repair the cylinder. A locksmith will have to tap the cylinder to repair it. They can do this using an hammer or another tools, but the most effective way is to make use of an extended match or piece of wire. Then, put the match's tip or wire close to the keyway. After this, the locksmith will hit the lock to break it open. This is much better than using a hammer that could cause damage to the lock.

The most frequent cause for cylinder head cracks is overheating. This can occur when the block and cylinder head are made of various metals such as cast-iron and aluminium. When various metals are heated and cool at different rates, it may cause localised hotspots that expand faster than the rest of the cylinder head, leading to cracks.

Another possible cause of cracks in cylinders is corrosion. If the head and block of the cylinder are not maintained properly they could be corroded or rust and cause them to expand more than anticipated. This can cause cracks as time passes.

If your uPVC window lock or door is brittle or requires an enormous amount of pressure to turn, it could be due to many things. A faulty locking mechanism, misalignment or an old handle are the most common causes of this issue.

This is a simple and cost-effective fix that a majority of double glazing owners can do. A professional locksmith will usually solve this issue within an hour of arriving at your property. Depending on your needs they can change the locking mechanism, change the window handles, and also change the gearboxes. A professional locksmith will always be able advise you on the most cost-effective options for your home. They can even recommend upgrades to 3 Star security euro cylinders TS007 that give you an additional layer of protection against burglars. It's a small amount to get the peace of mind that comes from knowing that your uPVC door is secured.

Broken Handle

Window handle locks are complex mechanisms that deteriorate with age and usage, so it's no surprise they occasionally break. If yours fails it's difficult to pinpoint the cause of the issue. Make sure that you repair it correctly.

The issue could be with the internal locking mechanism or the latch, repairing your broken handle will improve your uPVC double glazing door's security and allow you stop drafts. Incorrectly repairing or replacing your handle can be very expensive and can cause damage to the door's frame and lock It is therefore worth taking the time to do it right.

With the window open then loosen the screw that holds the handle with a screwdriver. The screw should be on the inside of the back plate, and is normally hidden by an attractive cover for the screw for aesthetic reasons. Be sure not to lose any of the internal components inside the handle, such as the levers or plates on either side of the spindle. Keep them in the same arrangement so that it is simpler to replace them in the event of a need.

Then, using a second screwdriver take the screw off that connects the handle to the spindle in the back. Once this is removed, you should be able to pull the handle off and pull off the damaged spindle. Replace it with a new spindle, ensuring it's the same length (you can find them online or at hardware stores). Securely screw it into place. Do not tighten the screw too much because this could harm the handle as well as the window frame.

Make sure the new handle is correctly fitted Close the window and test the handle. Hopefully, it will work smoothly and you'll be able open your window once more.





While you're working on the handle, make sure to check your uPVC windows are closing properly. If they're not cause draughts and damp in your home, as in addition to compromising the energy efficiency of your home. A local window company, like Core Sash Windows, will be in a position to adjust the hinges on your window frames so they can shut properly.

Broken Spindle

It is quite common that the spindle in a handle breaks rather than the handle itself. This is particularly frequent in uPVC tilt and turn windows. These windows require a handle that operates a locking device in the window frame. The handle is attached to a rod in the centre that triggers a set of cams that resemble mushrooms, which secure the frame of the window. If the dead latch mechanism does not open when the handle is turned it is likely that the spindle has been damaged, this can be a frustrating problem.

There are ways to fix this issue. A good locksmith can quickly and efficiently fix this problem. A reputable locksmith will be able disassemble the window's handle using a tool that removes the wheel portion that houses the spindle. This can be done without damaging the handle or causing any other damage to the frame of the window.

After removing the wheel, the technician will inspect the spindle and determine the cause of the break. This involves disassembling the spindle and inspecting every component, observing any damage or excessive wear. This procedure is typically carried out by technicians in an environment that is clean.

Then, clean the damaged spindle. This will remove any debris or dirt that could be hindering it from operating normally. The spindle could be repaired or replaced. If the technician is replacing the spindle it is possible to use a dowel that is the same size to the original. He will then drill holes that are identical to both pieces. This will ensure that the spindle will fit perfectly with the handle.

If the damaged spindle can't be repaired it may require replacement. Home centers sell generic replacements but if the window style is rare then you'll have to speak with a cabinet maker or woodworker who can make the exact piece. After the spindle is installed, it can be attached to the handle. Place the screw holes on the handle to the screws already in the frame. Once the new handle is firmly installed, you are now ready to operate your uPVC window.