The Top Reasons Why People Succeed In The Repairs To Upvc Windows Industry

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it could cause a large amount of damage to your home, which can make it very dangerous and potentially fatal. It is essential to make sure that your windows are in good working order.

For Continuing , it is fairly easy to replace them, and the new window will usually fit inside the frame of the previous one easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this instance you'll need to source some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. window repairs is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor where they could be trampled upon and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will keep drafts and water from entering your property until a professional is able to repair the window. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the gap is particularly large, you might want to consider using a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. Over time, they can develop a variety of issues such as sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

To fix a sagging window you can try repositioning the hinges. First, you'll need to open the windows so you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. After you've repositioned the hinges, shut your window and test it for an appropriate fit. If you are happy with the fit of the window, tighten the screws to hold them in the right position.

If you can't reposition the hinges you may need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it could be caused by the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC hand. The first step is to close the window and perform a test fit. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows can not only cause degradation of your home's structure but also undermine your efforts to regulate the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking may require removal before a new layer of caulk can be put on. When it is time to uPVC repair, it is important to avoid over-caulking. This will make your window harder to clean and reduce its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan is angled properly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotten sills are also signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

If the leakage occurs between the double-glazed glass it is more likely that the problem is related to the seal, not the frame. This can be easily repaired by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with a breeze It could be hinges at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like all mechanical parts, hinges can be damaged over time. It's very simple to change the hinges on a window but it's much easier if someone else helps you hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The problem can be caused either by opening the window incorrectly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you advice.





It is also essential to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. The ideal time to perform this every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. The hinges, also because of wear and tear, could become misaligned. This causes an opening to appear where the sash meets the frame. If they are beyond repair, it may be necessary to have them realigned. The interlock may be disaligned. This is located on the hinge's side and may need to be cleaned. In certain instances it is possible to replace these.

These seals can wear down or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to stop draughts. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and again will lessen the possibility of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They will help block out cold air and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security to your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a life span and they may reach the point when it's more economical to replace them than repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional as soon as possible.